Introduction to Silk Test Architecture

Normal use of an application consists of a person manipulating a keyboard and mouse to initiate application operations. The person is said to be interacting with the GUI (Graphical User Interface). During Silk Test testing, Silk Test interacts with the GUI to submit operations to the application automatically.

Thus Silk Test can simulate the actions of a person who is exercising all the capabilities of an application and verifying the results of each operation. The simulated user (Silk test) is said to be driving the application. The application under test reacts to the simulated user exactly as it would react to a human rest. Silk Test consists of two distinct software components that execute in separate processes:

The Silk Test host software

The 4Test Agent software

Silk Test host software

The Silk Test host software is the program you use to develop, edit, compile, run and debug your 4Test scripts and test plans. This manual refers to the system that runs this program as the host machine or the Silk Test machine.

The Agent

The 4Test Agent is the software process that translates the commands in your 4Test scripts into GUI-specific commands. In order words, it is the Agent that actually drives and monitors the application you are testing. One Agent can run locally on the host machine. In a networked environment, any number of Agents can run on remote machines. This manual refers to the systems that run remote Agents as target machines. This manual refers to the systems that run remote Agents as target machines. In a client/server environment, Silk Test drives the client application by means of an Agent process running on each application’s machine. The application then drives the server just as it always does. Silk Test is also capable of driving the GUI belonging to a server or of directly driving a server database by running scripts that submit SQL statements to the database. These methods o directly manipulating the server application are intended to support testing in which the client application drives the server.

Posted in general | Comments Off on Introduction to Silk Test Architecture

Top 25 Terms All Computer Students Should Know

The following basic terminologies are considered the top 25 terms all computer students should know before they even begin their studies:

1. Bit: Binary data storage unit valued at either 1 or 0.

2. Byte: Eight data bits valued between zero and 255.

3. Word: Two data bytes or 16 data bits between zero zero and 16,535.

4. CD-ROM: A storage disk with approximately 640 megabytes of capacity.

5. CD-ROM Drive: Hardware used for reading and writing to CD-ROMs.

6. Storage Media: Magnetic devices that permanently store computer data.

7. File: Permanent storage structure for data kept on a hard drive or other permanent place.

8. Virus: Unauthorized programs that infect files or send themselves via email.

9. Vulnerability: When unauthorized access can be gained due to software errors.

10. Security Flaw: When attackers gain unauthorized system access due to a software bug.

11. Worm: Unwanted programs accessing computers via application / system vulnerabilities.

12. Hardware: Physical parts of computer (case, disk drive, monitor, microprocessor, etc.).

13. Software: Programs that run on a computer system.

14. Firmware: Software that has been permanently written into a computer.

15. ISP: Internet Service Provider.

16. BIOS: The basic input / output system computers use to interface with devices.

17. MIME: Multipurpose Internet Mail Extension.

18. Boot: What happens when a computer is turned on and beginning to run.

19. Crash: When computer software errors occur and programs fail to respond.

20. Driver: Program that understands interfaced devices like printers and video cards.

21. Network: Cables and other electrical components carrying data between computers.

22. Operating System: A computer's core software component.

23. Parallel: Sending data over more than one line simultaniously.

24. Serial: Sending data over a single line one bit at a time.

25. Protocols: Communication methods and other standard Internet / networking functions.

These are the top 25 terms all computer students should know before they even begin their technical training. Most computer students know much more. In fact, everyone who uses a computer these days should understand these terms so they can be better informed about the important tool that is so integral to our daily lives.

Posted in general | Comments Off on Top 25 Terms All Computer Students Should Know

Clinic Management Software: Benefits of Clinic Software

Clinic management software is a web-based program which helps clinic owners manage their operations. It is already widely used in clinics in many regions of the world especially in the American continents, Europe, and Australia.

Here is a list of the many benefits of clinic management software.

1. It helps clinic owners simplify their business and helps them manage one clinic or a huge group of clinics.

2. It keeps and updates patients’ demographics like residence, gender, age, ethnicity, and diagnosis of patients.

3. It keeps and updates patients’ records like lungs chart, heart chart, kidney chart, weight and height charts, nutritional date, respiratory system chart and others.

4. It can print out prescriptions, patient records, billings, certificates, and others. It can also give information about patients’ prescription, medicine available, and the formulation of the medicine.

5. It completes receptions in an automated and systematized way.

6. It manages accounting needs and maintains the inventory.

7. It completes billing transactions.

8. It checks account balances.

5. It schedules multiple appointments.

6. It can send out multiple email reminders.

7. It allows patients to confirm appointment in real time with the use of a mobile phone or a computer.

8. It allows practitioners an easy and quick access to their schedule and patients’ record anytime.

9. It includes reporting tools which could quickly present, print out, or send out reports like patient visits, patients referred to other doctors, patients referred by other doctors, list of fee collection, and daily profit report.

10. It can multitask and designed for quick and easy usage which consequently lessens the stress of clinic owners and clinic employees.

11. It saves business owners a significant sum of money since clinic management software does not require expensive servers or IT support group.

12. It allows clinic owners maximize billable time and spend more time in taking care of their patients since almost all administrative procedures are supported by the software including the daily backing up of everyday reports.

13. It also allows clinic owners to spend more time in making their business grow.

14. Clinic management software general has security features like password facility to validate users, entry validation, data secrecy feature, and data access that is user defined.

Business establishments like clinics need to cope up with the fast advancement in technology nowadays. Otherwise, they will be left behind since most business enterprises are already using such software.

Posted in general | Comments Off on Clinic Management Software: Benefits of Clinic Software

The Role of Technology in Education

In the current age we live in, technology has become an important component. Every day there is some new gadget or software that makes lives easier and improves on the technology and software that already exists. Making lives easier is not, however, the only role technology plays in our lives.

Technology is playing an increasing role in education. As technology advances, it is used to benefit students of all ages in the learning process.

Technology used in the classroom helps students adsorb the material. For example, since some people are visual learners, projection screens linked to computers can allow students to see their notes instead of simply listening to a teacher deliver a lecture.

Software can be used to supplement class curriculum. The programs provide study questions, activities, and even tests and quizzes for a class that can help students continue learning outside the classroom.

Technology has also become part of many curriculums, even outside of computer and technology classes. Students use computers to create presentations and use the Internet to research topics for papers and essays.

Students also learn to use the technology available to them in computer and tech classes. This ensures that after graduation they will be able to use the technology in a work setting, which may put them ahead of someone who did not have access to a particular technology or software in their own school setting.

As technology advances, students have better access to educational opportunities like these. When something new and "better" is disclosed, the "older" technology becomes more affordable, allowing it to be used in educational settings, even when schools are on a tight budget.

Technology has also advanced to help children even before they've started school. Educational video games and systems for young children helps them prepare for school and in some cases get a head start on their education.

There are people who may say children are "spoiled" by technology. Instead of being able to add a long column of numbers in their heads, for example, they turn to a calculator. Regardless of these arguments, technology is an important part of today's society. By incorporating it into the classroom, students will be better equipped to transition from the classroom to the work place.

Posted in general | Comments Off on The Role of Technology in Education

How to Resolve “Memory Card Error” From Canon IXUS 130

Canon IXUS 130 is a sophisticated digital camera that has a resolution of 14.1 megapixels. The camera is inbuilt with almost all advanced features, including fully wide-angle 4x zoom lens and motion blur technology. The IXUS camera is compatible with SDHC (Secure Digital High Capacity) and SDXC (Secure Digital Extreme Capacity) cards, with storage capacity as high as 2TB.

Since the storage memory of the cards is huge, data loss from these cards is simultaneously huge. One of the main reasons for data loss from cards is corruption of these cards. In most cases, you receive an error message after your card gets corrupted. However, an updated backup allows you to overcome card corruption. It allows you to restore data. But in case of unavailability of backup, you can use recovery software to recover data from a corrupted card.

As a practical case, you view the below error message on Canon IXUS 130 while attempting to view some previously stored photos on your SDHC card:

“Memory Card Error”

Every single photo saved in the memory card becomes inaccessible after the above error message appears. In addition, no more photo can be saved on card. In short, the card can not be read or written upon.

Cause:

The above error message that makes all the photos inaccessible is primarily caused due to corruption of card. Few reasons that are accountable for the above error message are virus infection, interrupted read/write operation, and human errors.

Resolution:

The resolution for the above error message is formatting of memory card in the camera itself. The process deletes all the previously saved data and allows you to save new data. While formatting proves a good resolution for users who do not require the old data, it becomes fatal for users, like photographers, detective agents, etc, who save critical data in their memory card. However, recovering formatted data now-a-days is an easy process. To do so, you need to use an advanced third-party Photo Recovery Software. A Image Recovery tool is readily available on the Internet by just one single click.

Posted in general | Comments Off on How to Resolve “Memory Card Error” From Canon IXUS 130

How Are Brains Different From Computers?

Ever wondered how brains are different from computers? This article shows how. Read on to find out.

Brains consist of cells called neurons and they connect with millions of other neurons and information gets transferred across connection gaps called synapses. Inside the cells data are processed which gives rise to an idea, concept or understanding.

Computers are built of hardware chips and the central processing unit (CPU) processes data after receiving them from the other chips. How it processes data conss of several steps but the main outline is that software programs are fed into the CPU and processed. They provide end result information depending on how the programs are furnished with data and what the query is that fed into the system. If some information is asked that is outside the scope of the software programs, the computer gets limited in functioning.

Brains, however, are limitless. From childhood until adulthood, the brain gets more and more developed and mature. It can process unknown data or abstract data as well and provide insights and knowledge.

The brain is more complex than the CPU and therefore, with neurons and synaptic connections, it is possible to process all kinds of information. It uses the five senses: touch, smell, hearing, taste and sight and takes in information and produces knowledge.

On the other hand, the CPU of computers takes in data from the typing of the keyboard and processes it, which is very limited. However, it is only human beings feeding data, writing software programs and making the computer like like a brain although not quite so.

The brain is still more intelligent than the CPU of computers and has yet to train the computer to have like the brain of a human being.

Yes, computers will be able to take over many tasks of human beings but without human beings, they are lifeless because humans have to give life to these computers, operate on them and have regular updating, monitoring and maintenance on them.

Just as a brain needs to rest and relax, computers will also need that from time to time but they can operate longer times than the average brain. While the brain sleeps, the computer can carry on with its duties of processing data and converting them to knowledge and information.

Summing up, although the CPU is sometimes called the brain of the computer, it is actually a misnomer because as I have outlined in this article, the brain is definitely different from the computer in varying ways and the brain has yet to teach the computer to Behave 100% like a brain.

Posted in general | Comments Off on How Are Brains Different From Computers?

Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

If you want to learn about selecting hardware for your next outdoor furniture project, then you'll want to read this article. Specifically, I'll be telling you about what type of hardware will perform best, why the type of metal used for fasteners and the finish used are important considerations, and how properly protecting or limiting exposure of your furniture to wet and winter conditions can increase Life span. After you're done with this article you will understand that the best choice of hardware for your outdoor furniture project is dependent on furniture style, material used for construction, selected location for the furniture and budget.

Selecting proper hardware for your furniture will help ensure a long life span, as well as improve the overall appearance of your furniture. Part of the problem is knowing what hardware to select when there are so many options available at the hardware store. The typical Lowes or Home Depot carries a huge selection of stainless steel, hot dipped galvanized, bright galvanized, plain steel, coated steel and brass bolts, nuts, washers and screws. Each type of fastener is suitable for certain applications, but not all are ideal for outdoor furniture applications.

In fact, choosing the wrong fasteners can greatly shorten the lifespan of your furniture, contribute to rot of wood furniture, cause unsightly staining, and even make your furniture unsafe to use.

One thing that needs to be noted right up front is, do not ever use unprotected steel fasteners for outdoor furniture, they will rust very quickly, and the steel will react with the tannic acid in the wood causing streaks and staining. The tannic acid actually speeds up the corrosion of the fasteners. Have you ever seen a wooden fence with black streaks running down the boards from the nails? This fence was installed with the wrong type of fasteners. The same thing will happen to your furniture. Even worse, as the fasteners rust, they will speed up the decay process of the wood around the rusted fasteners, ruining your furniture and making it potentially unsafe to use.

Hot Dipped Galvanized

Screws and bolts treated by hot dipped galvanizing are specifically designed for use outdoors. Electroplated galvanized or bright galvanized fasteners will very well not hold up as well as the hot dipped galvanized hardware. Zinc is used as a coating in both methods, and acts as a barrier against the elements and the tannic acids in the wood.

I strongly recommend only using screws or bolts in the construction of outdoor furniture, however. The galvanized finish on nails, either electroplated or hot dipped, can easily become damaged while hammering them in, exposing the nail head to the elements and allowing them to begin rusting quickly.

Adequate care must be taken when installing galvanized screws. Drill pilot holes in hardwoods, and be sure to use a bit that is not worn and intolerable to skipping in the screw head. For whatever reason, the galvanized screws seem to not be as well tempered as other steel fasteners, and are more likely to either snap off or have the heads strip out while installing them. Due to the permission required for the hot dipped coating, galvanized bolts do not have as tight of tolerance on the threads, and are more likely to strip if over tightened.

Hot dipped galvanized fasteners are a fine choice for many outdoor furniture applications, including Adirondack Chairs, but are not the best choice for use in woods, such as teak.

Stainless steel

Stainless steel is the best choice for use in woods with higher levels of tannic acid, such as teak. Stainless steel is an alloy or blend of steel, nickel and chrome. The ratio of the other metals with the steel determine the weather and corrosion resistance of stainless steel. Because the steel is mixed with other softer metals, the stainless steel is not as strong, so predrilling of screw holes is highly recommended in all applications, and essential in hardwoods such as teak and mahogany. The added corrosion resistance more than outweighs any shortcomings that the metal may have, especially in outdoor furniture applications.

While stainless steel fasteners are the most rust resistant, they are also the most expensive of the options we are discussing. However, using stainless steel fasteners will add years of life to your furniture. In the respect, they are an investment that will pay out for years to come.

Brass

I have seen brass used in some commercially produced outdoor furniture, but do not recommend it. While brass does not form red rust, and is well suited for many wet applications such as toilets and sinks, it does tarnish and corrode. It is also very susceptible to the tannic acids in wood, which will cause it to fail more quickly. Brass screws in particular Do not have sufficient strength for outdoor furniture applications.

Outdoor or deck screws

In the past several years a number of manufacturers have introduced outdoor fastening products specifically marketed for deck building. These will typically be green, gray, tan or brown. These screws are either ceramic or plastic coated to delay the metal reacting with the wood acids. The specific coating methods are proprietary to each manufacturer, and can be a combination of electroplated galvanizing and plastic, or a baked on ceramic.

I have used these fasteners in furniture applications and they perform just fine. Unfortunately, I have not come across bolts with this type of finish. The brand of screw I used was Deck Mate, and they were available in tan and brown, so that the color can be selected to better match the wood being used. These screws are ceramic covered, and the manufacturer provided a coated bit for installation, which was designed to not damage the ceramic coating at the screw head. If you choose this type of fastener, be sure to compare the cost with stainless steel, as the price will vary. If the stainless steel is reasonably comparable in cost, it would be the recommended fastener.

Always be sure to read the manufacturers specifications on the box to be sure that the screws are suitable for your application.

Other Considerations

If you are building furniture that will be located on a covered porch or patio where it will be protected from the elements, the concern will be the interaction between the wood and the fasteners, much more so than the weather. Furniture that will be exposed to the elements all year, such as a garden bench, or an adirondack chair in the corner of your garden, will have to be constructed with much more care and concern to ensure that they hold up more than just one or Two winters.

Additional considerations must be made beyond just the choice of what type of fastener to use, though this is very important. For example, fasteners should not be located where water where collect and sit on the fasteners for an extended period of time. The screws that attach the seat slats to an Adirondack chair are a prime example- typically these screws will be countersunk below the surface of the wood. This will allow water to collect in the screw holes, shortening the life span of all but stainless steel fasteners, and prolonging the exposure of the wood to water, which will increase the rate of decay. In applications where the furniture will be exposed to the elements year round the screw heads should be driven flush with the surface of the surrounding wood.

Construction and design of the furniture are also important considerations. Are the horizontal surfaces of the furniture constructed in such a way that will allow them to shed water, rather than collect it? Think of a picnic table with a slatted or board top. The gaps between the boards allow water a way to run off the top and not pool up.

Conclusion

Stainless steel is usually the best choice for outdoor furniture applications, although the cost may be prohibitive for some. There are other less expensive fastener options available that will perform acceptably. Do not use unprotected steel fasteners for outdoor furniture applications under any circumstances. Know where and how you intend to use your furniture and design it for the conditions it will be subjected to.

Posted in general | Comments Off on Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

Can You Upgrade a Maya Student Version to a Full Commercial Edition?

The Maya 3D software from Autodesk has long-been a staple tool for the production of the highest level of Visual Effects and animation for Oscar-winning blockbuster movies, TV shows and video games.

Students who are looking to secure themselves commercial work upon graduation these days typically need to show some familiarity with this software…ideally the more the better, since most companies these days use Maya as their main software package, and many have it deeply integrated into their own proprietary pipelines and tools – meaning that the situation is unlikely to change for the foreseeable future.

Students who take the opportunity currently afforded them of purchasing a copy of the Maya Student Edition do well since they are able to improve their skillset on the full Unlimited version of the software, and do so at a huge discount (the student edition typically retails for around $350).

However, a number of students wonder if they also qualify for a discount later on if they wish to upgrade to a full commercial edition of the Maya software. Jumping from graduation to commercial work can be a challenge, so any way to alleviate the expense of setting yourself up as a freelancer is more than welcome…but can it actually be done?

Upgrade Maya Student Edition To Commercial License?

Yes, you’ll be pleased to know that there is a program available where current owners of a Maya student license are able to upgrade to the full commercial license at a massive discount of around 60%…in other words, a full commercial license of Maya would typically cost around $3,900, but student license holders are able to upgrade their current license to a full commercial one for just $1,300.

This is huge, and can be a real lifesaver for folks who want to go it alone and start their own freelance business but are wary of the huge costs involved.

In fact, if you’re smart about it and don’t mind a little negotiation, the license could even be purchased with a down-payment from your first client before you even begin working on their project.

Such a huge discount on the student to commercial upgrade is a great incentive for students, especially at this economic time, and it also makes purchasing the Maya student edition in the first place a sensible option, since you get access to these kinds of discounted upgrades.

Posted in general | Comments Off on Can You Upgrade a Maya Student Version to a Full Commercial Edition?

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

Creative Marketing Ideas For Hardware Stores

With large nationwide chains that dominate the market, small hardware stores sometimes have a difficult time being competitive. The key is to find a unique selling proposition for your business and to capitalize on it so customers see the value in choosing you over one of the larger stores. Here are some great ways to make your business stand out.

  1. Giveaways -When your store first opens (or even if you're just looking for an extra push), offer small giveaways to your customers with their purchase. These will be tools or products they can use that are branded with your store's information-hammers, tape measures, levels, etc. When a customer is using this product and runs out of something or determinates the need to visit a hardware store, they'll see your information and immediately head your way!
  2. In-Store Classes -Hardware stores often form a bit of a culture and social atmosphere, so find ways to play this up. One great choice is to sponsor training classes and educational seminars in your store. Work with your vendors to provide information that your customers will find valuable. Even your employees can instruct these classes-anything from minor home renovation products to full-scale remodeling. List the classes you're offering that month above your cash registers with a large, visible vinyl banner which clearly-informs customers of their opportunities to expand their skills.
  3. Charity Donations -Offer your products to charity groups and organizations in-town which build or repair homes for the less-fortunate. This is great PR for your business, it makes you look more-reliable, and in return you're often able to advertise at the home-site using a banner or yard sign. When customers see that you're giving back to your community, they are more-inclined to shop with you.
  4. Ladies Night -Most hardware stores predominately-market toward men. While the majority of your customers are probably male, do not neglect the ladies. Host a "Ladies Night" at your store that offers your educational classes and even a special discount on purchases made by women. Use removable window clings to give your store a slight feminine touch. There's a huge potential market here that is somewhat-untapped, and with the right approach, female customers can dramatically affect your business.
  5. Personal Shoppers -Some customers complain that hardware or home improvement stores are overwhelming. Counter this objection by providing customers with a personal shopping service. Your employees already help customers find products daily anyway, but creating a formal program provides a revenue opportunity. Customers can have one of your employees guide them around the store and help them find exactly what they need for their project, or for even-more convenience, your employee can preselect the products they need so that when the customer arrives, all they have to Do is check out.
Posted in general | Comments Off on Creative Marketing Ideas For Hardware Stores